i got a DVD from oneida for service how to but the bow i got {i think its a h-250} does not have the easy draw system or the madule system. i wanted to know what i needed to get a 31 inch draw? its like 30 now with a 50% let off. and i wanted to make a string for it and wanted to know what kind of string it needed to be and the length? my bow looks like the one in the picture as.

welcome from France to the forum,

nice paint for this bow...

could you make more pictures about :
-saddle
-end of limbs
-cames

and if you have the serial number on the down power limbs, it could be helpfull too...

with all, I think that Joe could give you what is she exactly ...

Both the 30/31 and 31/32 inch Oneida H250's has blue power cables and black yoke cables. The only difference in the two is the string length. The dacron string for the 30/31 is 48 inches long with brace heights from 7 5/8 to 8 1/8 and the 31/32 takes a 49 inch string with brace heights from 7 3/4 to 8 1/4. You cannot use a fast flyte string material on an any oneida bow with abs plastic limb tips. That is an awsome looking paint job.