Author |
Message |
LightningEVAustralia
|
Post subject: Aeroforce Question? Posted: Wed Sep 29, 2010 5:09 pm |
|
Joined: Thu Sep 23, 2010 7:41 pm Posts: 11 Location: Tamworth NSW Australia
|
Hi, sorry guys if this is the wrong spot because I couldn't figure out where to put it.
I have just bought an old 97 Aeroforce X80 fishing bow and sent it to Joe to be setup and rebuilt for Target shooting.
I am curious as to why the specs were lowered on the Oneida Aeroforce from 305fps to 280fps in the later models.Normal bow evolution would suggest it would get raised to 315fps like a certain other bow did.
Also I can't find a weight for the Aeroforce, How much does it weigh?
I am looking for real world feedback on this bow, what people have found to be good about this bow and what they have found to be it's limitations.
Are there any upgradable modules or limbs or strings for the Aeroforce X80?
Thanks guys.
_________________ If one does not ever "take" time, how can one ever really "have" time.
|
|
Top |
|
|
JOneida
|
Post subject: Re: Aeroforce Question? Posted: Thu Dec 09, 2010 11:28 am |
|
Site Admin |
|
Joined: Mon Jan 15, 2007 10:13 pm Posts: 3733 Location: Farmingdale Maine
|
The aeroforce is a great bow but not a speed bow. The 280 you mention is very good speed and to get more you can go to the lowest let off module you can handle with the longest module. So very short valley and low lett off will get more speed. You can also add a 452x string or 8125 as both will give you more speed.
_________________ Registered Maine Guide
CPOneida Eagle Bows Dealer
Staff Shooter Easton Arrows
Bows
Falcon
Switchblade Prototype
|
|
Top |
|
|