| Author |
Message |
|
z_herndon
|
Post subject: how too topic  Posted: Tue Jun 15, 2010 9:32 am |
|
Joined: Mon Jun 14, 2010 7:15 pm
Posts: 1
|
|
i am new with oneida bows and i am trying to figure out how to adjust the draw length on my bow. i have a eagle and it is at about 30 to 31 inches and i am a 29 in. draw. if someone could help me out i would greatly appreciate it. i am setting it up to bowfish.
|
|
| Top |
|
 |
|
JOneida
|
Post subject: Re: how too topic Posted: Tue Jun 15, 2010 11:49 am |
|
| Site Admin |
 |
Joined: Mon Jan 15, 2007 10:13 pm
Posts: 3733
Location: Farmingdale Maine
|
|
I am also new to bowfishing bows but have been working on oneida eagle bows for years. From what I have been told most shooting is snap shooting. I would try setting up bow so you have the brace set at the high side of specs. Then try shooting the bow. You can also check out the charts/,manuals section of the forum. There are spec charts for the bows there. To change draw length on your bow you would need to check which outboard limbs/Cams/cables and string your bow has. Once you know this you can figure out what changes would be needed to shorten the bow to your draw length.
_________________
Registered Maine Guide
CPOneida Eagle Bows Dealer
Staff Shooter Easton Arrows
Bows
Falcon
Switchblade Prototype
|
|
| Top |
|
|
