oneidabows.net

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-29T14:57:05-05:00

John the weight of the stops on the cams is insignifcant from what I have seen. But the stops on the limb seems to be a more exact one. I prefer them on the underside of the limbs.

Statistics: Posted by JOneida — Fri Oct 29, 2010 2:57 pm

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-29T14:40:51-05:00

JOneida wrote:

John, these oneida black eagle cam draw stops work with the oneida black eagle cammed bows. We dont have them for the bows that use the I or K cams at this time we recomend using the tear drop mounted to the cam or the pylon mounted stops for them.

I understand, thanks Joe! Would there be an advantage to these on the older bows? Seems like it would be better than having them weigh down the cams! Yes or no?

Statistics: Posted by John c — Fri Oct 29, 2010 2:40 pm

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-29T07:17:56-05:00

Statistics: Posted by JOneida — Fri Oct 29, 2010 7:17 am

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-29T04:30:19-05:00

So the mounting holes are threaded? Do these draw stops also come with longer hinge screws? Is there an advantage to removing the old draw stops off the cams?
Thanks,

John C.

Statistics: Posted by John c — Fri Oct 29, 2010 4:30 am

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-25T18:40:05-05:00

Marty the idea of a rubber bumper sounds great also. In the case someone wanted to use a button head screw the rubber bumpers cp oneida uses would work great.

Statistics: Posted by JOneida — Mon Oct 25, 2010 6:40 pm

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-25T17:23:57-05:00

Nylon makes perfect sense, I just assumed they were metal.

Statistics: Posted by NuttyNative — Mon Oct 25, 2010 5:23 pm

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-25T16:09:45-05:00

Marty these stops are nylon and do not damage limbs. For those who are concerned about this rubber stops on the limbs can be added.

Statistics: Posted by JOneida — Mon Oct 25, 2010 4:09 pm

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-25T14:59:37-05:00

After 4 years I disassembled my BEII. When disassembling my limbs I didn't find any marks from the metal bar. Accept for some silicone residu, which I use to lubricate. And viewing the pictures, I don't see any rough edges on those limbstops. So I don't think it would be likely that these limbstops do leave a mark.

Thanks

Sven

Statistics: Posted by Sven — Mon Oct 25, 2010 2:59 pm

Re: Oneida Bows JMB 6061 Draw Stops

2010-10-25T13:57:15-05:00

Do the draw stops leave a mark on the limbs? Looks like over time without some kind of rubber/rubberized cover they may wear into the limbs.

Statistics: Posted by NuttyNative — Mon Oct 25, 2010 1:57 pm

Re: Oneida Bows JMB 6061 Draw Stops

2010-07-24T14:57:50-05:00

You're a mind reader. Been on the verge of asking when these and the end caps were going to get in the "catalog". Maybe should move this to the announcement section where it won't get buried over time. Thanks

Statistics: Posted by RockAR — Sat Jul 24, 2010 2:57 pm

Oneida Bows JMB 6061 Draw Stops

2010-07-24T11:25:10-05:00

Oneida bows JMB 6061 draw stops 29.95 TYDdraw stops 002.jpgLungbusters Extreme 010.jpg

Statistics: Posted by JOneida — Sat Jul 24, 2010 11:25 am