oneidabows.net

Re: draw length adjustments on a screaming eagle

2010-10-14T00:27:15-04:00

Have you checked the brace height? If the brace height is not in tolerance and too low for the bow, then the draw length can be too long. If the brace height needs to be adjusted higher, refer to the Cable and Brace Height Charts and instructions in the Manual at the links below. To increase the brace height, you must remove the bow string from the bow and add twist to the bow string.

viewtopic.php?f=43&t=305
viewtopic.php?f=43&t=335

Frank

Statistics: Posted by huntsman53 — Thu Oct 14, 2010 12:27 am

Re: draw length adjustments on a screaming eagle

2010-10-13T20:30:42-04:00

Your bow can be upgraded using kcams and converting to a phantom setup. Works great. But is costly. We carry the parts if you would like more information give us a call.

Statistics: Posted by JOneida — Wed Oct 13, 2010 8:30 pm

draw length adjustments on a screaming eagle

2010-08-15T13:27:17-04:00

I have a screaming eagle and was wondering if I how the draw length is adjusted my length feels a little long, and I was wondering about up grading some of the parts on thebow to some newer tech stuff if there is anything that could be used on a bow this old. thanks for any advice.

Statistics: Posted by doodlebug_289 — Sun Aug 15, 2010 1:27 pm