oneidabows.net

Re: lite force draw lengt changing

2010-08-19T08:13:55-04:00

Johnson, your bow goes down to a long twenty eight inches with the short modules for the bow when shooting off the string in my experience. 28 is as short as the bow will go and that in my opinion is with the brace height set on the high side. This section of the forum is the welcome area so I am moving this thread to the tech section.

Statistics: Posted by JOneida — Thu Aug 19, 2010 8:13 am

Re: lite force draw lengt changing

2010-08-18T22:42:57-04:00

i just measured my draw length at 28 inches

Statistics: Posted by johnson — Wed Aug 18, 2010 10:42 pm

Re: lite force draw lengt changing

2010-08-18T22:12:57-04:00

the sticker on the bow says medium and i need 27 inches

Statistics: Posted by johnson — Wed Aug 18, 2010 10:12 pm

Re: lite force draw lengt changing

2010-08-18T20:31:53-04:00

Adjusting the draw length depends on which model you have. Short/Medium or a long. And what you need to have for a draw length. Which model is your oneida light force and what draw length do you need.

Statistics: Posted by JOneida — Wed Aug 18, 2010 8:31 pm

lite force draw lengt changing

2010-08-18T17:36:50-04:00

i have just got a Oneida eagle lite force i would like to shorten the draw length but have no clue were to start anyone know.

Statistics: Posted by johnson — Wed Aug 18, 2010 5:36 pm